electric arc process
英 [ɪˈlektrɪk ɑːk ˈprəʊses]
美 [ɪˈlektrɪk ɑːrk ˈprɑːses]
网络 电弧焊法
双语例句
- Exploring Research on Energy Integration in Working Operation Scale by Trans-scale in the Electric Arc Furnace Steelmaking Process
电弧炉炼钢过程的跨尺度能量集成的探索研究 - 20T Electric Arc Furnace and Steel Process Control Analysis and Processing Lag
和钢20T电弧炉过程控制滞后分析及处理 - The electric arc furnace ( EAF) dust pellets were reduced in isothermal condition in order to make the reduction similar to the EAF production, and the kinetics of the reduction process is researched.
为使还原条件与实际电弧炉生产相接近，在等温条件下对电弧炉粉尘球团的还原过程动力学进行了研究。 - The electric arc steelmaking process may be divided into the following four stages: charging, melting, refining and tapping.
电弧炉炼钢可以分为以下4个阶段：装料，熔化，精炼和出钢。 - This article has studied the casting steel single-slag smelting process for electric arc furnace, and discussed in detail the applicable condition and limit of the singleslag smelting process.
对电弧炉铸钢单渣熔炼工艺进行了研究，较为详细地讨论了其工艺适应条件和范围。 - Photographing and Dynamical Dealing in Electric Arc Welding Process
电弧焊过程的图像拍摄和动态处理 - Review of Electric Arc Furnace Process and Problems in Its Development
电炉短流程回顾和发展中的若干问题 - Based on modular idea, how to establish the scheduling model of an electric arc furnace steelmaking continuous casting process by coloured Petri nets with interval timed arcs is specified.
利用模块化思想，以区段赋时弧有色Petri网为工具，说明了如何建立一个电炉炼钢连铸过程的实时调度模型。 - A simulative calculation is made on the operating parameters of a 100t AC electric arc furnace, and then a comparison between the model simulation and actual EAF process is conducted and results show a very good agreement.
以某100t交流电弧炉冶炼的操作参数为例进行了仿真计算，并与现场数据作了对比，结果表明模型可与实际结果吻合得很好。 - Calculation thermodynamics for slag abilities of oxidation and sulfur-removing in electric arc furnace dust reduction process
电弧炉粉尘直接还原炉渣氧化和脱硫能力计算热力学 - Properties comparision for self bonding coating by electric arc process
电弧喷涂自结合涂层的性能比较 - Simulation, Forecast, Diagnose and Optimization of Electric Arc Furnace Process
炼钢电弧炉工艺过程的仿真、预测、诊断与优化 - The reducing slag used was the kind left over in the steel smelting when the electric arc furnace process was adopted.
所用炉渣为电炉炼钢的还原渣，是废物利用，变害为利。 - Numerical simulation is an effective method to study the arc plasma in DC electric arc furnace, which can be used to provide a reference for understanding and optimizing the production process of DC electric arc furnace.
数值模拟是研究直流电弧炉中电弧等离子体射流特性的有效方法，它可为理解和优化电弧炉冶炼过程提供参考依据。 - This paper presents technique of injecting coal oxygen directly to the electric arc furnace in steel refining and summarizes experiences of accelerated melting using a coal oxygen lance in K ES electric arc process and foamed slag formation operation through coal oxygen injection.
本文叙述了电弧炉炼钢直接用煤氧技术，总结了煤气枪助熔技术、K-ES电炉新工艺和喷煤氧造泡沫渣操作工艺。 - Computer control of electric arc steelmaking process based on a mathematical model
根据数学模型对电炉炼钢的计算机控制 - Based on the feature of the procedure of electric arc furnace steelmaking with continuous charging, the mathematical model of process static control has been established, of which the calculated results are analyzed.
根据连续加料式电弧炉炼钢工艺特点，建立了该工艺过程静态控制数学模型，并对数学模型的运算结果进行了分析讨论。 - This paper introduce the features of the UHP electric furnace ── secondary refin-ing ── continuous casting process of Guangzhou Iron and steel Corporation and the technological research works on realizing sequence casting with the existing 40t UHP arc ─ furnace process.
介绍广钢UHP电炉－炉外精炼&连铸短流程工艺特点，40tUHP电炉工艺实现全连铸的技术研究工作。 - Its electric characteristic, structure feature, fault analysis, interface circuit and arc welding process program are analyzed and discussed.
对其电气性能、结构特点，故障诊断、接口电路及弧焊工作程序等作了比较全面的分析和讨论。 - Electric Arc Furnace steel-making is a complex industrial production process and the performance of its electrode adjusting systemis a key factor which can effect the production benefit.
电弧炉炼钢是一种复杂的工业生产过程，电极调节系统的性能是影响生产效益的重要因素。 - Modeling of dynamic electric arc and analyzing on the electric arc dynamic characteristics during the interrupting process.
动态电弧模型的建立以及开断过程电弧动态特性的研究。 - It is pointed out that at present the development of UHP electric arc furnace technology is embodied in high transformer utilization factor, optimum process and flowsheet, improving environment and so on.
指出目前超高功率电弧炉技术的发展主要体现在高变压器利用率、工艺和流程优化、改善环境等方面。 - De noising in Electric Signals of Arc Welding Process via Wavelet Soft threshold
弧焊过程电信号小波软阈值消噪 - Electric arc furnace ( EAF) system is a kind of industrial production process, which possesses considerable nonlinear, time varying and strong coupled.
电弧炉系统是一种具有较强非线性、时变性和强耦合的工业生产过程。 - Because of the non-linearity of the electric arc, changes of the minerals during the ferroalloy smelting process and the fluctuation of the working conditions, the submerged arc furnace are unstable, which not only affects the quality of the production, but also increases the power consumption.
由于矿热炉电弧的非线性及铁合金冶炼过程中的炉料的变化、工况波动等的影响，使得矿热炉的工况不稳定，不仅影响产品的质量，而且导致电耗高。